Single or Double Heads Hydraulic Drawing Bench for Tube and Sheet,Full Automatic
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Single Or Double Heads Hydraulic Drawing Bench For Tube And Sheet,Full Automatic
The hydraulic automatic draw bench applies to draw forming and length cut of various copper-aluminum profiles after extruding, The drawn profiles have stable cross-sectional size, good dimensional accuracy, improved hardness, elastic limit and the conductivity, and at the same time the machine increases the material utilization and greatly improves the surface quality of the profiles.
We can supply 30 tons ,50 tons and 80 tons etc hydraulic draw bench.
Specifications(30tons,if you need other model,please mail us)
1 | Model | SYLB(?)-30-6 | |
2 | Nominal drawing force | 30t | |
3 | Effective drawing length | 6m | |
4 | Profile specification | Width | Max 60mm |
Thickness | Max 6mm | ||
5 | Drawing speed | 3~10m/min | |
6 | Return speed | 45m/min | |
7 | Install capacity | 75KW | |
8 | Compressed air | 0.8Mpa, 2m3/h | |
9 | Consumption of cooling water | 30m3/h | |
10 | Power supply | Three-phase four-wire | |
11 | Dimension | Length | 15500 |
Width | 4200 | ||
Height | 2200 | ||
12 | Requirements of the length of the workshop (mm) | 29000×5000 |
Production process
Place the coil—?Straightening and feeding—?Clamp copper bar—?cool & lubricate die and copper bar—?Drawing—?Cut copper bar—?Transport—?convey with roller—?Backer sizing—?Final product cutting—?Unloading by worker
Ted Machine, with over 10 years experience, is one of leading single or double heads hydraulic drawing bench for tube and sheet,full automatic manufacturers and suppliers in China. We have introduced advanced equipment and technology in our plant. Welcome to buy the customized and quality equipment from our factory.
- Chain Type Drawing Bench for Tube and Sheet,Single or Double Heads Is Available 1 Pieces / (Min. Order)
- Steel Sleeve For Aluminum Strips Rolling Mill Winder 1 Pieces / (Min. Order)
- Forged Ring for Slewing Bearing 1 Pieces / (Min. Order)
- Cast Iron Roll,Work Rolls for The Rougher Stands of Hot Strip Mills 1 Pieces / (Min. Order)
- Forged Support Rolls,Middle Rolls,Forming Rolls or Straightening Rolls 1 Pieces / (Min. Order)
- Forged Sendzimir or Sundwig Work Roller 1 Pieces / (Min. Order)
- Chain Type Drawing Bench for Tube and Sheet,Single or Double Heads Is Available 1 Pieces / (Min. Order)
- Three Rollers Cold Rolling Mill for Ferrous and Non-Ferrous Metals Tube,LD Model 1 Pieces / (Min. Order)
- Graphite Crucible as Melting Furnace for Small Production 1 Pieces / (Min. Order)
- Graphite Molds for Continuous Casting Machine 1 Pieces / (Min. Order)
- Vertical Casting Machine for Copper Sheet,Thickness 10mm 1 Pieces / (Min. Order)
- Vertical Casting Machine for 8mm-17mm Copper Rod 1 Pieces / (Min. Order)
- Horizontal Casting Machine for Brass and Bronze Rod,Hollow Bar,Busbar and Special Section 1 Pieces / (Min. Order)
- Horizontal Continuous Casting Machine for Copper Solid Bar,hollow Billets,sheet and Special Section 1 Pieces / (Min. Order)